Home > GG Touch Panel >

TX23 RX31 10.4 Inch MST Capacitive GG Touch Panel 85% Transparency

Product Categories

Interactive Touch Screen [32]
Touch Foil Screen [58]
Interactive Bluetooth Speaker [30]
Bone Conduction Bluetooth Headphone [29]
GG Touch Panel [42]
GFF Touch Panel [20]
Embedded Touch Monitor [20]
Infrared Touch Frame [46]
Touch Screen Module [54]
Retail Smart Mirror [16]
Touch Screen Smart Mirror [7]
Kiosk Digital Signage [8]
Interactive Fitness Mirror [17]
Stretched Bar Display [20]
Smart Mirror TV [14]
Desktop Touch Monitors [12]

Sinotectronics Inc.

Contact Now

TX23 RX31 10.4 Inch MST Capacitive GG Touch Panel 85% Transparency

Ask Lasest Price
Brand Name :	Master Touch
Model Number :	MST-GG-TPB-10.4-ILI
Price :	$40-45/piece
Payment Terms :	L/C, T/T, Western Union
Supply Ability :	50000~100000pcs/Month
Delivery Time :	5-8 work days

Add to Cart

Product Details
Company Profile

TX23 RX31 10.4 Inch MST Capacitive GG Touch Panel 85% Transparency

10.4 Inch 10 Touch Points MST Capacitive GG Touch Panel with 85% Transparency

1. Product Description

MST G + G Capacitive Touch Panel is made of a surface tempered glass and a ensor glass with Pcap technology. Capacitive touch panel works through body's current induction .When finger is on or close to touch panel surface,due to body electric field, the user and touch panel surface forms one coupling capacitance. For high frequency current, capacitance is direct conductor, then fingers suck a small current from the contact point, through amplifying and accurately calculating this current signal, the controller works out the touch point position.

2. Basic Features

Item	Feature	Remarks
Controller	ILI2511	-
Channel	TX: 23 RX: 31	-
Power	5V	USB: 4.7V ~ 6.0V, Typical:5V
Communication	USB	USB: 2.0 Full Speed
Number of Touch point	10	-
O.S.	Windows/ Android/ Linux	plug and play
Power Consumption	1.Active Mode: Max.120mA @ USB Input 5V 2.Idle Mode: 90mA @ USB Input 5V 3.Sleep Mode: less than 1mA @ USB Input 5V

3. Mechanical Characteristics

Item	Specification	Unit
Viewing Area	211(L)×158.4(W)	mm
Cover Lense O.D.	259.2(L)×206.4(W)	mm

4. Optical Characteristics

Item		Specification
Transparency	Viewing Area	≧85%

5. Sensor Specification

Item			Specification	Unit
Stacked structure	Cover		1.1	mm
	LOCA		0.2	mm
	ITO		0.7	mm
	Sensor Glass
	ITO
Sensor Dimension	OD Size	X	228	mm
		Y	173.43	mm

6. Drawing

7. Details

8. Related Test

Item		Specification	Result
Cover lens	Ball Drop	200g ± 2g 35cm	One drop test on each of the 5 selected points, No damage
	Hardness	Pencil: 6H Pressure: 1N/45°	Hardness ≧ 6H
	Warpage	By Gauge	Warpage 0.1% ≦ Length *
FPC/COF	Bending	Bending range0-180° 30times Electrical Function ok	-

9. Reliablility Test

Reliability test report
Objects		□Raw material □New production process □Abnormal item □New product □Finished product □Sample □Experiment procedure and method □Others □Production line program
Purpose: to verify the applicability of the experimental product when being stored,transported and used under the extreme environmental conditions.
Experiment requirements: ①Before the experiment, make sure the functions of the product must be good,while the cosmetic may be good or non-good according to the purpose of the experiment. ②If it is necessary to do the experiment again,make sure all materials must be put in the same room for at least 2hrs and make sure that there is no water vapor on its surface. ③It is prohibited to open the door before we finish the whole experiment. ④The product is requested to be kept for more than 1 years,after the experiment.
No.	Items		Test condition	Criterion

1	High temperature and humidity test		1. Temperature: 60℃ 2. Humidity: 90%RH 3. Time: finished product 120H	Appearance test refer tostandard OK Function detection OK
2	Temperature Switching impact test		1.High temperature 2.Low temperature 3. 30 times in cycle	Appearance test refer tostandard OK Function detection OK
3	Salt spray test		1.Concentration: 5% NaCl solution 2.Temperature: 35℃ 3.Time: finished product 48H	Appearance test refer tostandard OK Function detection OK
4	High temperature storage test		1.Temperature: 80℃ 2.Time: 120H	Appearance test refer tostandard OK Function detection OK
5	Low temperature storage test		1.Temperature: -30℃ 2.Time: 120H	Appearance test refer tostandard OK Function detection OK
6	Red ink test		1. Room temperature 2. Time: 8H	1. No ink infiltration 2. All functions are good
7	Hand sweat test		1. Sweat PH=4.7 2. Time: 48H	Appearance test refer tostandard OK Function detection OK
8	Static electricity test		1. Air discharge: 8KV 2. Contact discharge: 6KV 3.Times: 10 times for each point	Appearance test refer tostandard OK Function detection OK

10. FAQ

Product Tags:


*From:	Your email address is incorrect!
*To:	Sinotectronics Inc.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!